REI has Ergon Handlebar Grips for prices listed below. Select store pickup where available.
Ergon GP3 Handlebar Grips -$35.89
https://www.rei.com/product/884446/ergon-gp3-handlebar-grips
Bar ends and grip bodies can be independently adjusted dependent on preference; bar ends also double as the locking clamps for the grips
Bar ends are made of lightweight nylon-composite (GFK) with rubber inserts
German-made rubber compound is latex-free and UV-stable
Bar end size: 3 finger, 50mm
Ergon GP2 Handlebar Grips - $29.89
https://www.rei.com/product/884445/ergon-gp2-handlebar-grips
Bar ends are made of lightweight nylon-composite (GFK) with rubber inserts
Bar ends and grip bodies can be independently adjusted dependent on preference; bar ends also double as the locking clamps for the grip
German-made rubber compound is latex-free and UV-stable
Note: These grips are not suitable for use with carbon handlebars
Bar end size: 2 finger, 35mm
Ergon GP5 Handlebar Grips - $47.89
https://www.rei.com/product/884447/ergon-gp5-handlebar-grips
Bar ends and grip bodies can be independently adjusted dependent on preference; bar ends also double as the locking clamp for the grip
Requires 140mm of bar space on each side of standard shifters (L size) or 105mm on each side for twist shifters; (S size) requires standard diameter of 22.2mm
Bar ends are made of lightweight nylon-composite (GFK) with rubber inserts
German-made rubber compound is latex-free and UV-stable
Note: These grips are not suitable for the use with carbon handlebars
Bar end size: multiposition, 110mm
Ergon GP3 Handlebar Grips -$35.89
https://www.rei.com/product/884446/ergon-gp3-handlebar-grips
Bar ends and grip bodies can be independently adjusted dependent on preference; bar ends also double as the locking clamps for the grips
Bar ends are made of lightweight nylon-composite (GFK) with rubber inserts
German-made rubber compound is latex-free and UV-stable
Bar end size: 3 finger, 50mm
Ergon GP2 Handlebar Grips - $29.89
https://www.rei.com/product/884445/ergon-gp2-handlebar-grips
Bar ends are made of lightweight nylon-composite (GFK) with rubber inserts
Bar ends and grip bodies can be independently adjusted dependent on preference; bar ends also double as the locking clamps for the grip
German-made rubber compound is latex-free and UV-stable
Note: These grips are not suitable for use with carbon handlebars
Bar end size: 2 finger, 35mm
Ergon GP5 Handlebar Grips - $47.89
https://www.rei.com/product/884447/ergon-gp5-handlebar-grips
Bar ends and grip bodies can be independently adjusted dependent on preference; bar ends also double as the locking clamp for the grip
Requires 140mm of bar space on each side of standard shifters (L size) or 105mm on each side for twist shifters; (S size) requires standard diameter of 22.2mm
Bar ends are made of lightweight nylon-composite (GFK) with rubber inserts
German-made rubber compound is latex-free and UV-stable
Note: These grips are not suitable for the use with carbon handlebars
Bar end size: multiposition, 110mm